/* SPDX-License-Identifier: MPL-2.0 */
#include "precompiled.hpp"
#include <stdlib.h>
#include <string.h>
#include <cmath>
#include "ws_protocol.hpp"
#include "ws_decoder.hpp"
#include "likely.hpp"
#include "wire.hpp"
#include "err.hpp"
zmq::ws_decoder_t::ws_decoder_t (size_t bufsize_,
int64_t maxmsgsize_,
bool zero_copy_,
bool must_mask_) :
decoder_base_t<ws_decoder_t, shared_message_memory_allocator> (bufsize_),
_msg_flags (0),
_zero_copy (zero_copy_),
_max_msg_size (maxmsgsize_),
_must_mask (must_mask_),
_size (0)
{
memset (_tmpbuf, 0, sizeof (_tmpbuf));
int rc = _in_progress.init ();
errno_assert (rc == 0);
// At the beginning, read one byte and go to opcode_ready state.
next_step (_tmpbuf, 1, &ws_decoder_t::opcode_ready);
}
zmq::ws_decoder_t::~ws_decoder_t ()
{
const int rc = _in_progress.close ();
errno_assert (rc == 0);
}
int zmq::ws_decoder_t::opcode_ready (unsigned char const *)
{
const bool final = (_tmpbuf[0] & 0x80) != 0; // final bit
if (!final)
return -1; // non final messages are not supported
_opcode = static_cast<zmq::ws_protocol_t::opcode_t> (_tmpbuf[0] & 0xF);
_msg_flags = 0;
switch (_opcode) {
case zmq::ws_protocol_t::opcode_binary:
break;
case zmq::ws_protocol_t::opcode_close:
_msg_flags = msg_t::command | msg_t::close_cmd;
break;
case zmq::ws_protocol_t::opcode_ping:
_msg_flags = msg_t::ping | msg_t::command;
break;
case zmq::ws_protocol_t::opcode_pong:
_msg_flags = msg_t::pong | msg_t::command;
break;
default:
return -1;
}
next_step (_tmpbuf, 1, &ws_decoder_t::size_first_byte_ready);
return 0;
}
int zmq::ws_decoder_t::size_first_byte_ready (unsigned char const *read_from_)
{
const bool is_masked = (_tmpbuf[0] & 0x80) != 0;
if (is_masked != _must_mask) // wrong mask value
return -1;
_size = static_cast<uint64_t> (_tmpbuf[0] & 0x7F);
if (_size < 126) {
if (_must_mask)
next_step (_tmpbuf, 4, &ws_decoder_t::mask_ready);
else if (_opcode == ws_protocol_t::opcode_binary) {
if (_size == 0)
return -1;
next_step (_tmpbuf, 1, &ws_decoder_t::flags_ready);
} else
return size_ready (read_from_);
} else if (_size == 126)
next_step (_tmpbuf, 2, &ws_decoder_t::short_size_ready);
else
next_step (_tmpbuf, 8, &ws_decoder_t::long_size_ready);
return 0;
}
int zmq::ws_decoder_t::short_size_ready (unsigned char const *read_from_)
{
_size = (_tmpbuf[0] << 8) | _tmpbuf[1];
if (_must_mask)
next_step (_tmpbuf, 4, &ws_decoder_t::mask_ready);
else if (_opcode == ws_protocol_t::opcode_binary) {
if (_size == 0)
return -1;
next_step (_tmpbuf, 1, &ws_decoder_t::flags_ready);
} else
return size_ready (read_from_);
return 0;
}
int zmq::ws_decoder_t::long_size_ready (unsigned char const *read_from_)
{
// The payload size is encoded as 64-bit unsigned integer.
// The most significant byte comes first.
_size = get_uint64 (_tmpbuf);
if (_must_mask)
next_step (_tmpbuf, 4, &ws_decoder_t::mask_ready);
else if (_opcode == ws_protocol_t::opcode_binary) {
if (_size == 0)
return -1;
next_step (_tmpbuf, 1, &ws_decoder_t::flags_ready);
} else
return size_ready (read_from_);
return 0;
}
int zmq::ws_decoder_t::mask_ready (unsigned char const *read_from_)
{
memcpy (_mask, _tmpbuf, 4);
if (_opcode == ws_protocol_t::opcode_binary) {
if (_size == 0)
return -1;
next_step (_tmpbuf, 1, &ws_decoder_t::flags_ready);
} else
return size_ready (read_from_);
return 0;
}
int zmq::ws_decoder_t::flags_ready (unsigned char const *read_from_)
{
unsigned char flags;
if (_must_mask)
flags = _tmpbuf[0] ^ _mask[0];
else
flags = _tmpbuf[0];
if (flags & ws_protocol_t::more_flag)
_msg_flags |= msg_t::more;
if (flags & ws_protocol_t::command_flag)
_msg_flags |= msg_t::command;
_size--;
return size_ready (read_from_);
}
int zmq::ws_decoder_t::size_ready (unsigned char const *read_pos_)
{
// Message size must not exceed the maximum allowed size.
if (_max_msg_size >= 0)
if (unlikely (_size > static_cast<uint64_t> (_max_msg_size))) {
errno = EMSGSIZE;
return -1;
}
// Message size must fit into size_t data type.
if (unlikely (_size != static_cast<size_t> (_size))) {
errno = EMSGSIZE;
return -1;
}
int rc = _in_progress.close ();
assert (rc == 0);
// the current message can exceed the current buffer. We have to copy the buffer
// data into a new message and complete it in the next receive.
shared_message_memory_allocator &allocator = get_allocator ();
if (unlikely (!_zero_copy || allocator.data () > read_pos_
|| static_cast<size_t> (read_pos_ - allocator.data ())
> allocator.size ()
|| _size > static_cast<size_t> (
allocator.data () + allocator.size () - read_pos_))) {
// a new message has started, but the size would exceed the pre-allocated arena
// (or read_pos_ is in the initial handshake buffer)
// this happens every time when a message does not fit completely into the buffer
rc = _in_progress.init_size (static_cast<size_t> (_size));
} else {
// construct message using n bytes from the buffer as storage
// increase buffer ref count
// if the message will be a large message, pass a valid refcnt memory location as well
rc = _in_progress.init (
const_cast<unsigned char *> (read_pos_), static_cast<size_t> (_size),
shared_message_memory_allocator::call_dec_ref, allocator.buffer (),
allocator.provide_content ());
// For small messages, data has been copied and refcount does not have to be increased
if (_in_progress.is_zcmsg ()) {
allocator.advance_content ();
allocator.inc_ref ();
}
}
if (unlikely (rc)) {
errno_assert (errno == ENOMEM);
rc = _in_progress.init ();
errno_assert (rc == 0);
errno = ENOMEM;
return -1;
}
_in_progress.set_flags (_msg_flags);
// this sets read_pos to
// the message data address if the data needs to be copied
// for small message / messages exceeding the current buffer
// or
// to the current start address in the buffer because the message
// was constructed to use n bytes from the address passed as argument
next_step (_in_progress.data (), _in_progress.size (),
&ws_decoder_t::message_ready);
return 0;
}
int zmq::ws_decoder_t::message_ready (unsigned char const *)
{
if (_must_mask) {
int mask_index = _opcode == ws_protocol_t::opcode_binary ? 1 : 0;
unsigned char *data =
static_cast<unsigned char *> (_in_progress.data ());
for (size_t i = 0; i < _size; ++i, mask_index++)
data[i] = data[i] ^ _mask[mask_index % 4];
}
// Message is completely read. Signal this to the caller
// and prepare to decode next message.
next_step (_tmpbuf, 1, &ws_decoder_t::opcode_ready);
return 1;
}
↑ V730 Not all members of a class are initialized inside the constructor. Consider inspecting: _opcode, _mask.