/* SPDX-License-Identifier: MPL-2.0 */
 
#include "precompiled.hpp"
#include <new>
#include "macros.hpp"
#include "session_base.hpp"
#include "i_engine.hpp"
#include "err.hpp"
#include "pipe.hpp"
#include "likely.hpp"
#include "tcp_connecter.hpp"
#include "ws_connecter.hpp"
#include "ipc_connecter.hpp"
#include "tipc_connecter.hpp"
#include "socks_connecter.hpp"
#include "vmci_connecter.hpp"
#include "vsock_connecter.hpp"
#include "pgm_sender.hpp"
#include "pgm_receiver.hpp"
#include "address.hpp"
#include "norm_engine.hpp"
#include "udp_engine.hpp"
 
#include "ctx.hpp"
#include "req.hpp"
#include "radio.hpp"
#include "dish.hpp"
 
zmq::session_base_t *zmq::session_base_t::create (class io_thread_t *io_thread_,
                                                  bool active_,
                                                  class socket_base_t *socket_,
                                                  const options_t &options_,
                                                  address_t *addr_)
{
    session_base_t *s = NULL;
    switch (options_.type) {
        case ZMQ_REQ:
            s = new (std::nothrow)
              req_session_t (io_thread_, active_, socket_, options_, addr_);
            break;
        case ZMQ_RADIO:
            s = new (std::nothrow)
              radio_session_t (io_thread_, active_, socket_, options_, addr_);
            break;
        case ZMQ_DISH:
            s = new (std::nothrow)
              dish_session_t (io_thread_, active_, socket_, options_, addr_);
            break;
        case ZMQ_DEALER:
        case ZMQ_REP:
        case ZMQ_ROUTER:
        case ZMQ_PUB:
        case ZMQ_XPUB:
        case ZMQ_SUB:
        case ZMQ_XSUB:
        case ZMQ_PUSH:
        case ZMQ_PULL:
        case ZMQ_PAIR:
        case ZMQ_STREAM:
        case ZMQ_SERVER:
        case ZMQ_CLIENT:
        case ZMQ_GATHER:
        case ZMQ_SCATTER:
        case ZMQ_DGRAM:
        case ZMQ_PEER:
        case ZMQ_CHANNEL:
#ifdef ZMQ_BUILD_DRAFT_API
            if (options_.can_send_hello_msg && options_.hello_msg.size () > 0)
                s = new (std::nothrow) hello_msg_session_t (
                  io_thread_, active_, socket_, options_, addr_);
            else
                s = new (std::nothrow) session_base_t (
                  io_thread_, active_, socket_, options_, addr_);
 
            break;
#else
            s = new (std::nothrow)
              session_base_t (io_thread_, active_, socket_, options_, addr_);
            break;
#endif
 
        default:
            errno = EINVAL;
            return NULL;
    }
    alloc_assert (s);
    return s;
}
 
zmq::session_base_t::session_base_t (class io_thread_t *io_thread_,
                                     bool active_,
                                     class socket_base_t *socket_,
                                     const options_t &options_,
                                     address_t *addr_) :
    own_t (io_thread_, options_),
    io_object_t (io_thread_),
    _active (active_),
    _pipe (NULL),
    _zap_pipe (NULL),
    _incomplete_in (false),
    _pending (false),
    _engine (NULL),
    _socket (socket_),
    _io_thread (io_thread_),
    _has_linger_timer (false),
    _addr (addr_)
#ifdef ZMQ_HAVE_WSS
    ,
    _wss_hostname (options_.wss_hostname)
#endif
{
}
 
const zmq::endpoint_uri_pair_t &zmq::session_base_t::get_endpoint () const
{
    return _engine->get_endpoint ();
}
 
zmq::session_base_t::~session_base_t ()
{
    zmq_assert (!_pipe);
    zmq_assert (!_zap_pipe);
 
    //  If there's still a pending linger timer, remove it.
    if (_has_linger_timer) {
        cancel_timer (linger_timer_id);
        _has_linger_timer = false;
    }
 
    //  Close the engine.
    if (_engine)
        _engine->terminate ();
 
    LIBZMQ_DELETE (_addr);
}
 
void zmq::session_base_t::attach_pipe (pipe_t *pipe_)
{
    zmq_assert (!is_terminating ());
    zmq_assert (!_pipe);
    zmq_assert (pipe_);
    _pipe = pipe_;
    _pipe->set_event_sink (this);
}
 
int zmq::session_base_t::pull_msg (msg_t *msg_)
{
    if (!_pipe || !_pipe->read (msg_)) {
        errno = EAGAIN;
        return -1;
    }
 
    _incomplete_in = (msg_->flags () & msg_t::more) != 0;
 
    return 0;
}
 
int zmq::session_base_t::push_msg (msg_t *msg_)
{
    //  pass subscribe/cancel to the sockets
    if ((msg_->flags () & msg_t::command) && !msg_->is_subscribe ()
        && !msg_->is_cancel ())
        return 0;
    if (_pipe && _pipe->write (msg_)) {
        const int rc = msg_->init ();
        errno_assert (rc == 0);
        return 0;
    }
 
    errno = EAGAIN;
    return -1;
}
 
int zmq::session_base_t::read_zap_msg (msg_t *msg_)
{
    if (_zap_pipe == NULL) {
        errno = ENOTCONN;
        return -1;
    }
 
    if (!_zap_pipe->read (msg_)) {
        errno = EAGAIN;
        return -1;
    }
 
    return 0;
}
 
int zmq::session_base_t::write_zap_msg (msg_t *msg_)
{
    if (_zap_pipe == NULL || !_zap_pipe->write (msg_)) {
        errno = ENOTCONN;
        return -1;
    }
 
    if ((msg_->flags () & msg_t::more) == 0)
        _zap_pipe->flush ();
 
    const int rc = msg_->init ();
    errno_assert (rc == 0);
    return 0;
}
 
void zmq::session_base_t::reset ()
{
}
 
void zmq::session_base_t::flush ()
{
    if (_pipe)
        _pipe->flush ();
}
 
void zmq::session_base_t::rollback ()
{
    if (_pipe)
        _pipe->rollback ();
}
 
void zmq::session_base_t::clean_pipes ()
{
    zmq_assert (_pipe != NULL);
 
    //  Get rid of half-processed messages in the out pipe. Flush any
    //  unflushed messages upstream.
    _pipe->rollback ();
    _pipe->flush ();
 
    //  Remove any half-read message from the in pipe.
    while (_incomplete_in) {
        msg_t msg;
        int rc = msg.init ();
        errno_assert (rc == 0);
        rc = pull_msg (&msg);
        errno_assert (rc == 0);
        rc = msg.close ();
        errno_assert (rc == 0);
    }
}
 
void zmq::session_base_t::pipe_terminated (pipe_t *pipe_)
{
    // Drop the reference to the deallocated pipe if required.
    zmq_assert (pipe_ == _pipe || pipe_ == _zap_pipe
                || _terminating_pipes.count (pipe_) == 1);
 
    if (pipe_ == _pipe) {
        // If this is our current pipe, remove it
        _pipe = NULL;
        if (_has_linger_timer) {
            cancel_timer (linger_timer_id);
            _has_linger_timer = false;
        }
    } else if (pipe_ == _zap_pipe)
        _zap_pipe = NULL;
    else
        // Remove the pipe from the detached pipes set
        _terminating_pipes.erase (pipe_);
 
    if (!is_terminating () && options.raw_socket) {
        if (_engine) {
            _engine->terminate ();
            _engine = NULL;
        }
        terminate ();
    }
 
    //  If we are waiting for pending messages to be sent, at this point
    //  we are sure that there will be no more messages and we can proceed
    //  with termination safely.
    if (_pending && !_pipe && !_zap_pipe && _terminating_pipes.empty ()) {
        _pending = false;
        own_t::process_term (0);
    }
}
 
void zmq::session_base_t::read_activated (pipe_t *pipe_)
{
    // Skip activating if we're detaching this pipe
    if (unlikely (pipe_ != _pipe && pipe_ != _zap_pipe)) {
        zmq_assert (_terminating_pipes.count (pipe_) == 1);
        return;
    }
 
    if (unlikely (_engine == NULL)) {
        if (_pipe)
            _pipe->check_read ();
        return;
    }
 
    if (likely (pipe_ == _pipe))
        _engine->restart_output ();
    else {
        // i.e. pipe_ == zap_pipe
        _engine->zap_msg_available ();
    }
}
 
void zmq::session_base_t::write_activated (pipe_t *pipe_)
{
    // Skip activating if we're detaching this pipe
    if (_pipe != pipe_) {
        zmq_assert (_terminating_pipes.count (pipe_) == 1);
        return;
    }
 
    if (_engine)
        _engine->restart_input ();
}
 
void zmq::session_base_t::hiccuped (pipe_t *)
{
    //  Hiccups are always sent from session to socket, not the other
    //  way round.
    zmq_assert (false);
}
 
zmq::socket_base_t *zmq::session_base_t::get_socket () const
{
    return _socket;
}
 
void zmq::session_base_t::process_plug ()
{
    if (_active)
        start_connecting (false);
}
 
//  This functions can return 0 on success or -1 and errno=ECONNREFUSED if ZAP
//  is not setup (IE: inproc://zeromq.zap.01 does not exist in the same context)
//  or it aborts on any other error. In other words, either ZAP is not
//  configured or if it is configured it MUST be configured correctly and it
//  MUST work, otherwise authentication cannot be guaranteed and it would be a
//  security flaw.
int zmq::session_base_t::zap_connect ()
{
    if (_zap_pipe != NULL)
        return 0;
 
    endpoint_t peer = find_endpoint ("inproc://zeromq.zap.01");
    if (peer.socket == NULL) {
        errno = ECONNREFUSED;
        return -1;
    }
    zmq_assert (peer.options.type == ZMQ_REP || peer.options.type == ZMQ_ROUTER
                || peer.options.type == ZMQ_SERVER);
 
    //  Create a bi-directional pipe that will connect
    //  session with zap socket.
    object_t *parents[2] = {this, peer.socket};
    pipe_t *new_pipes[2] = {NULL, NULL};
    int hwms[2] = {0, 0};
    bool conflates[2] = {false, false};
    int rc = pipepair (parents, new_pipes, hwms, conflates);
    errno_assert (rc == 0);
 
    //  Attach local end of the pipe to this socket object.
    _zap_pipe = new_pipes[0];
    _zap_pipe->set_nodelay ();
    _zap_pipe->set_event_sink (this);
 
    send_bind (peer.socket, new_pipes[1], false);
 
    //  Send empty routing id if required by the peer.
    if (peer.options.recv_routing_id) {
        msg_t id;
        rc = id.init ();
        errno_assert (rc == 0);
        id.set_flags (msg_t::routing_id);
        bool ok = _zap_pipe->write (&id);
        zmq_assert (ok);
        _zap_pipe->flush ();
    }
 
    return 0;
}
 
bool zmq::session_base_t::zap_enabled () const
{
    return (options.mechanism != ZMQ_NULL || !options.zap_domain.empty ());
}
 
void zmq::session_base_t::process_attach (i_engine *engine_)
{
    zmq_assert (engine_ != NULL);
    zmq_assert (!_engine);
    _engine = engine_;
 
    if (!engine_->has_handshake_stage ())
        engine_ready ();
 
    //  Plug in the engine.
    _engine->plug (_io_thread, this);
}
 
void zmq::session_base_t::engine_ready ()
{
    //  Create the pipe if it does not exist yet.
    if (!_pipe && !is_terminating ()) {
        object_t *parents[2] = {this, _socket};
        pipe_t *pipes[2] = {NULL, NULL};
 
        const bool conflate = get_effective_conflate_option (options);
 
        int hwms[2] = {conflate ? -1 : options.rcvhwm,
                       conflate ? -1 : options.sndhwm};
        bool conflates[2] = {conflate, conflate};
        const int rc = pipepair (parents, pipes, hwms, conflates);
        errno_assert (rc == 0);
 
        //  Plug the local end of the pipe.
        pipes[0]->set_event_sink (this);
 
        //  Remember the local end of the pipe.
        zmq_assert (!_pipe);
        _pipe = pipes[0];
 
        //  The endpoints strings are not set on bind, set them here so that
        //  events can use them.
        pipes[0]->set_endpoint_pair (_engine->get_endpoint ());
        pipes[1]->set_endpoint_pair (_engine->get_endpoint ());
 
        //  Ask socket to plug into the remote end of the pipe.
        send_bind (_socket, pipes[1]);
    }
}
 
void zmq::session_base_t::engine_error (bool handshaked_,
                                        zmq::i_engine::error_reason_t reason_)
{
    //  Engine is dead. Let's forget about it.
    _engine = NULL;
 
    //  Remove any half-done messages from the pipes.
    if (_pipe) {
        clean_pipes ();
 
        //  Only send disconnect message if socket was accepted and handshake was completed
        if (!_active && handshaked_ && options.can_recv_disconnect_msg
            && !options.disconnect_msg.empty ()) {
            _pipe->set_disconnect_msg (options.disconnect_msg);
            _pipe->send_disconnect_msg ();
        }
 
        //  Only send hiccup message if socket was connected and handshake was completed
        if (_active && handshaked_ && options.can_recv_hiccup_msg
            && !options.hiccup_msg.empty ()) {
            _pipe->send_hiccup_msg (options.hiccup_msg);
        }
    }
 
    zmq_assert (reason_ == i_engine::connection_error
                || reason_ == i_engine::timeout_error
                || reason_ == i_engine::protocol_error);
 
    switch (reason_) {
        case i_engine::timeout_error:
            /* FALLTHROUGH */
        case i_engine::connection_error:
            if (_active) {
                reconnect ();
                break;
            }
 
        case i_engine::protocol_error:
            if (_pending) {
                if (_pipe)
                    _pipe->terminate (false);
                if (_zap_pipe)
                    _zap_pipe->terminate (false);
            } else {
                terminate ();
            }
            break;
    }
 
    //  Just in case there's only a delimiter in the pipe.
    if (_pipe)
        _pipe->check_read ();
 
    if (_zap_pipe)
        _zap_pipe->check_read ();
}
 
void zmq::session_base_t::process_term (int linger_)
{
    zmq_assert (!_pending);
 
    //  If the termination of the pipe happens before the term command is
    //  delivered there's nothing much to do. We can proceed with the
    //  standard termination immediately.
    if (!_pipe && !_zap_pipe && _terminating_pipes.empty ()) {
        own_t::process_term (0);
        return;
    }
 
    _pending = true;
 
    if (_pipe != NULL) {
        //  If there's finite linger value, delay the termination.
        //  If linger is infinite (negative) we don't even have to set
        //  the timer.
        if (linger_ > 0) {
            zmq_assert (!_has_linger_timer);
            add_timer (linger_, linger_timer_id);
            _has_linger_timer = true;
        }
 
        //  Start pipe termination process. Delay the termination till all messages
        //  are processed in case the linger time is non-zero.
        _pipe->terminate (linger_ != 0);
 
        //  TODO: Should this go into pipe_t::terminate ?
        //  In case there's no engine and there's only delimiter in the
        //  pipe it wouldn't be ever read. Thus we check for it explicitly.
        if (!_engine)
            _pipe->check_read ();
    }
 
    if (_zap_pipe != NULL)
        _zap_pipe->terminate (false);
}
 
void zmq::session_base_t::timer_event (int id_)
{
    //  Linger period expired. We can proceed with termination even though
    //  there are still pending messages to be sent.
    zmq_assert (id_ == linger_timer_id);
    _has_linger_timer = false;
 
    //  Ask pipe to terminate even though there may be pending messages in it.
    zmq_assert (_pipe);
    _pipe->terminate (false);
}
 
void zmq::session_base_t::process_conn_failed ()
{
    std::string *ep = new (std::string);
    _addr->to_string (*ep);
    send_term_endpoint (_socket, ep);
}
 
void zmq::session_base_t::reconnect ()
{
    //  For delayed connect situations, terminate the pipe
    //  and reestablish later on
    if (_pipe && options.immediate == 1
#ifdef ZMQ_HAVE_OPENPGM
        && _addr->protocol != protocol_name::pgm
        && _addr->protocol != protocol_name::epgm
#endif
#ifdef ZMQ_HAVE_NORM
        && _addr->protocol != protocol_name::norm
#endif
        && _addr->protocol != protocol_name::udp) {
        _pipe->hiccup ();
        _pipe->terminate (false);
        _terminating_pipes.insert (_pipe);
        _pipe = NULL;
 
        if (_has_linger_timer) {
            cancel_timer (linger_timer_id);
            _has_linger_timer = false;
        }
    }
 
    reset ();
 
    //  Reconnect.
    if (options.reconnect_ivl > 0)
        start_connecting (true);
    else {
        std::string *ep = new (std::string);
        _addr->to_string (*ep);
        send_term_endpoint (_socket, ep);
    }
 
    //  For subscriber sockets we hiccup the inbound pipe, which will cause
    //  the socket object to resend all the subscriptions.
    if (_pipe
        && (options.type == ZMQ_SUB || options.type == ZMQ_XSUB
            || options.type == ZMQ_DISH))
        _pipe->hiccup ();
}
 
void zmq::session_base_t::start_connecting (bool wait_)
{
    zmq_assert (_active);
 
    //  Choose I/O thread to run connecter in. Given that we are already
    //  running in an I/O thread, there must be at least one available.
    io_thread_t *io_thread = choose_io_thread (options.affinity);
    zmq_assert (io_thread);
 
    //  Create the connecter object.
    own_t *connecter = NULL;
    if (_addr->protocol == protocol_name::tcp) {
        if (!options.socks_proxy_address.empty ()) {
            address_t *proxy_address = new (std::nothrow)
              address_t (protocol_name::tcp, options.socks_proxy_address,
                         this->get_ctx ());
            alloc_assert (proxy_address);
            connecter = new (std::nothrow) socks_connecter_t (
              io_thread, this, options, _addr, proxy_address, wait_);
            alloc_assert (connecter);
            if (!options.socks_proxy_username.empty ()) {
                reinterpret_cast<socks_connecter_t *> (connecter)
                  ->set_auth_method_basic (options.socks_proxy_username,
                                           options.socks_proxy_password);
            }
        } else {
            connecter = new (std::nothrow)
              tcp_connecter_t (io_thread, this, options, _addr, wait_);
        }
    }
#if defined ZMQ_HAVE_IPC
    else if (_addr->protocol == protocol_name::ipc) {
        connecter = new (std::nothrow)
          ipc_connecter_t (io_thread, this, options, _addr, wait_);
    }
#endif
#if defined ZMQ_HAVE_TIPC
    else if (_addr->protocol == protocol_name::tipc) {
        connecter = new (std::nothrow)
          tipc_connecter_t (io_thread, this, options, _addr, wait_);
    }
#endif
#if defined ZMQ_HAVE_VMCI
    else if (_addr->protocol == protocol_name::vmci) {
        connecter = new (std::nothrow)
          vmci_connecter_t (io_thread, this, options, _addr, wait_);
    }
#endif
#if defined ZMQ_HAVE_WS
    else if (_addr->protocol == protocol_name::ws) {
        connecter = new (std::nothrow) ws_connecter_t (
          io_thread, this, options, _addr, wait_, false, std::string ());
    }
#endif
#if defined ZMQ_HAVE_WSS
    else if (_addr->protocol == protocol_name::wss) {
        connecter = new (std::nothrow) ws_connecter_t (
          io_thread, this, options, _addr, wait_, true, _wss_hostname);
    }
#endif
#if defined ZMQ_HAVE_VSOCK
    else if (_addr->protocol == protocol_name::vsock) {
        connecter = new (std::nothrow)
          vsock_connecter_t (io_thread, this, options, _addr, wait_);
    }
#endif
 
    if (connecter != NULL) {
        alloc_assert (connecter);
        launch_child (connecter);
        return;
    }
 
    if (_addr->protocol == protocol_name::udp) {
        zmq_assert (options.type == ZMQ_DISH || options.type == ZMQ_RADIO
                    || options.type == ZMQ_DGRAM);
 
        udp_engine_t *engine = new (std::nothrow) udp_engine_t (options);
        alloc_assert (engine);
 
        bool recv = false;
        bool send = false;
 
        if (options.type == ZMQ_RADIO) {
            send = true;
            recv = false;
        } else if (options.type == ZMQ_DISH) {
            send = false;
            recv = true;
        } else if (options.type == ZMQ_DGRAM) {
            send = true;
            recv = true;
        }
 
        int rc = engine->init (_addr, send, recv);
        errno_assert (rc == 0);
 
        send_attach (this, engine);
 
        return;
    }
 
#ifdef ZMQ_HAVE_OPENPGM
 
    //  Both PGM and EPGM transports are using the same infrastructure.
    if (_addr->protocol == "pgm" || _addr->protocol == "epgm") {
        zmq_assert (options.type == ZMQ_PUB || options.type == ZMQ_XPUB
                    || options.type == ZMQ_SUB || options.type == ZMQ_XSUB);
 
        //  For EPGM transport with UDP encapsulation of PGM is used.
        bool const udp_encapsulation = _addr->protocol == "epgm";
 
        //  At this point we'll create message pipes to the session straight
        //  away. There's no point in delaying it as no concept of 'connect'
        //  exists with PGM anyway.
        if (options.type == ZMQ_PUB || options.type == ZMQ_XPUB) {
            //  PGM sender.
            pgm_sender_t *pgm_sender =
              new (std::nothrow) pgm_sender_t (io_thread, options);
            alloc_assert (pgm_sender);
 
            int rc =
              pgm_sender->init (udp_encapsulation, _addr->address.c_str ());
            errno_assert (rc == 0);
 
            send_attach (this, pgm_sender);
        } else {
            //  PGM receiver.
            pgm_receiver_t *pgm_receiver =
              new (std::nothrow) pgm_receiver_t (io_thread, options);
            alloc_assert (pgm_receiver);
 
            int rc =
              pgm_receiver->init (udp_encapsulation, _addr->address.c_str ());
            errno_assert (rc == 0);
 
            send_attach (this, pgm_receiver);
        }
 
        return;
    }
#endif
 
#ifdef ZMQ_HAVE_NORM
    if (_addr->protocol == "norm") {
        //  At this point we'll create message pipes to the session straight
        //  away. There's no point in delaying it as no concept of 'connect'
        //  exists with NORM anyway.
        if (options.type == ZMQ_PUB || options.type == ZMQ_XPUB) {
            //  NORM sender.
            norm_engine_t *norm_sender =
              new (std::nothrow) norm_engine_t (io_thread, options);
            alloc_assert (norm_sender);
 
            int rc = norm_sender->init (_addr->address.c_str (), true, false);
            errno_assert (rc == 0);
 
            send_attach (this, norm_sender);
        } else { // ZMQ_SUB or ZMQ_XSUB
 
            //  NORM receiver.
            norm_engine_t *norm_receiver =
              new (std::nothrow) norm_engine_t (io_thread, options);
            alloc_assert (norm_receiver);
 
            int rc = norm_receiver->init (_addr->address.c_str (), false, true);
            errno_assert (rc == 0);
 
            send_attach (this, norm_receiver);
        }
        return;
    }
#endif // ZMQ_HAVE_NORM
 
    zmq_assert (false);
}
 
zmq::hello_msg_session_t::hello_msg_session_t (io_thread_t *io_thread_,
                                               bool connect_,
                                               socket_base_t *socket_,
                                               const options_t &options_,
                                               address_t *addr_) :
    session_base_t (io_thread_, connect_, socket_, options_, addr_),
    _new_pipe (true)
{
}
 
zmq::hello_msg_session_t::~hello_msg_session_t ()
{
}
 
 
int zmq::hello_msg_session_t::pull_msg (msg_t *msg_)
{
    if (_new_pipe) {
        _new_pipe = false;
 
        const int rc =
          msg_->init_buffer (&options.hello_msg[0], options.hello_msg.size ());
        errno_assert (rc == 0);
 
        return 0;
    }
 
    return session_base_t::pull_msg (msg_);
}
 
void zmq::hello_msg_session_t::reset ()
{
    session_base_t::reset ();
    _new_pipe = true;
}